Timer Menu - Zenith VRB210 Operating Manual

Timer Menu

The TIMER Menu tells the VCR when to record a program on a day and at a time you specify.
You can specify eight different events to be recorded in a one-year period.
SpeakEZ
CLOCK : 1
TIMER : 2
SETUP : 3
AUDIO : 4
Press number keys
QUIT = exit
Month of Recording
Day of Recording
Start Time of Recording
Stop Time of Recording
Channel of Recording
Speed of Recording
Frequency of Recording
How to Use Timer
1. Choose TIMER menu as described in "How to Access Menus"
on page 9.
2. When the TIMER menu is displayed on screen, press the
ENTER button to select the correct month, then press the
ENTER button again to move the next option or setting.
3. When you have entered all of the settings to your
satisfaction, press QUIT to exit the menu system.
Note:
Set the VCR in TIMER mode by pressing POWER to turn off the VCR.
The TIMER indicator light appears in the front panel of the VCR.
You cannot operate the VCR manually while it is
recording. Pressing POWER stops the recording.
To Erase a Program
1. Choose TIMER menu as described in "How to Access Menus"
on page 9.
2. Press NUMBER(1-8) to select desired PROGRAM to be erased.
3. Press 0 to erase the program.
4. Press QUIT to exit the menu system.
PROGRAM 1
MONTH :
Press 2 DAY :
START :
STOP :
CHANNEL :
SPEED :
REPEAT:
( 1 - 8 ) to select program
ENTER to adjust program
PROGRAM 1
MONTH : 7 JULY
DAY : 20 TUE
START : 11:16 AM
STOP : 11:46 AM
CHANNEL : 20 TV
SPEED : EP
REPEAT: ONCE
( 1 - 8 ) to select program
To erase press (0)
Press QUIT
Timer will be on
when VCR is off
O P E R AT I O N
PROGRAM
MONTH :
DAY :
START :
STOP :
CHANNEL :
SPEED
REPEAT:
( 1 - 8 ) to select program
ENTER to adjust program
Program Number
When highlighted, press NUMBER (1-8) to
choose program Number.
REPEAT OPTIONS
ONCE — Records once.
WEEKLY — Records once each week.
DAILY — Records one time each day,
Monday - Friday.
CHANNEL OPTIONS
To select an AUX channel, select the next
highest or lowest channel programmed in
the VCR with the CH (▼/▲).
SPEED OPTIONS (SP or EP)
The SP mode determines how much tape is
left and switches speed from SP to EP, if
necessary, to complete recording the
program. There will be some picture and
sound distortion at the point of the speed
change.
AM/PM OPTIONS
Press 1 for AM
Press 2 for PM
PROGRAM 1
MONTH : 7 JULY
DAY : 20 TUE
START : 11:16 AM
STOP : 11:46 AM
CHANNEL : 20 TV
SPEED : EP
REPEAT: ONCE
( 1 - 8 ) to select program
To erase press (0)
Press 0 to erase program
P A G E 1 7
8
:
Follow
these
steps