Table of Contents
Advertisement
8. Alarm Visual and Audible Indicators
The following tables describes the visual and audible alarm conditions
the unit may report and illustrates how the unit will indicate normal
standby, alarm and error conditions.
Alarm
Mode
Smoke or Fire detected
Carbon Monoxide
detected
Operational
Mode
Normal
Operation
Test/Hush
Button
Press
Smoke or
CO Alarm
Hush
Low Battery
Fault Mode
End of Unit
Life*
End of Unit
Life Hush
* End of life hush feature. Silences end of life indication 3 days at a time
for a maximum of 30 days.
If you require further information please contact Service on 1800 654 435
or visit our website at www.quell.com.au.
Visual Indications
3 blinks synchronized
with audible alarm
4 blinks synchronized
with audible alarm
Visual
Indications
Blink once
every 60
seconds
Blink with each
alarm pattern
Blink once
every 10
seconds
Blink once
every 30
seconds
Fault code (2-12
flashes every
30 seconds)
2 blinks every
30 seconds
None
Audible
Indications
None
Two sets of 3
long beeps
None (smoke
alarm
silenced)
Chirp every 60
seconds
Chirp every 30
seconds
2 chirps every
30 seconds
None (End of
Life chirps
silenced)
Audible Indications
3 long beeps(ISO8201),
repeating
4 quick beeps, repeating
Note:
LED will flash every 60
seconds for 10 minutes
following power on or
reset. After initial 10
minutes, LED will flash
once every 10 minutes
Test/Hush button press
will initiate test sequence
Alarm hush feature
silences smoke alarm for
approx. 10 minutes.
Replace alarm
Replace alarm
Remove alarm, disable,
replace
11
Advertisement
Table of Contents
