Table of Contents
Advertisement
8. Alarm Visual and Audible Indicators
The following tables describes the visual and audible alarm conditions
the unit may report and illustrates how the unit will indicate normal
standby, alarm and error conditions.
Alarm
Mode
Smoke or Fire
detected
Operational
Mode
Normal
Operation
Test/Hush
Button
Press
Smoke
Alarm
Hush
Low Battery
Fault Mode
End of Unit
Life*
If you require further information please contact Service on 1800 654 435
or visit our website at www.quell.com.au.
Visual Indications
Flashes every 0.5
seconds
Visual
Indications
Flash once
every 60-70
seconds
Flash with each
alarm pattern
Flash once
every 10
seconds
Flash once
every 30
seconds
No Flash
2 Flash every
30 seconds
Audible Indications
3 long beeps(ISO8201),
repeating
Audible
Indications
None
Two sets of
3 long beeps
None (smoke
alarm silenced)
Chirp every
60 seconds
Chirp every
30 seconds
Chirps every
60 seconds
Note:
Test/Hush button
press will initiate test
sequence
Alarm hush feature
silences smoke
alarm for approx. 10
minutes. See page
13 for additional
instructions.
Remove, turn off,
replace alarm.
Remove, turn off
replace alarm
Remove, turn off
replace alarm
11
Advertisement
Table of Contents
