Controls And Connection Options - Zenith P50W26 Installation And Operating Manual

Monitor Controls
Power Standby Indicator
Illuminates red in standby mode,
Illuminates green when the
Monitor is turned on
Connection Options
R
AUDIO
( ) R ( )
AUDIO
EXTERNAL SPEAKER (8 )
AC INPUT
INPUT
1 2
1. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to 'Speaker & Speaker Stand'
manual.
2. POWER CORD SOCKET
This Monitor operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
3. AUDIO/VIDEO INPUT JACKS
Connect audio/video out from external equipment to these
jacks.
S-VIDEO INPUTS (S-VIDEO)
Connect video out from an S-VIDEO VCR to the S-VIDEO
input.
4. COMPONENT(DVD/DTV INPUT)/AUDIO INPUT JACKS
6
Front Panel Controls
VOL. MENU INPUT SELECT
INPUT SELECT Button
MENU Button
VOLUME ( F , G ) Buttons
D E
, Buttons
Back Connection Panel
Y P P
B R
L (MONO)
VIDEO COMPONENT
S-VIDEO
(DVD/DTV INPUT)
INPUT
3 4
Remote Control Sensor
ON/ OFF
R AUDIO L
AUDIO
CONTROL REMOTE RGB1 OUTPUT
INPUT LOCK CONTROL (PC/DTV OUTPUT)
5 6
5. CONTROL LOCK Switch
REMOTE CONTROL
When "CONTROL LOCK" is set "ON", Monitor is operated by
the external control device.
6. RGB1 OUTPUT(PC/DTV OUTPUT) JACKS
You can watch the RGB1 signal on another monitor, connect
RGB1 OUTPUT (PC/DTV OUTPUT) to another monitor's
PC input port.
7. AUDIO INPUT/RGB1 INPUT(PC/DTV INPUT)/
RGB2 INPUT(DIGITAL RGB INPUT) JACKS
Connect the monitor output socket of the PC to this socket.
8. RS-232C INPUT(CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
ON/OFF
Main Power Button
RGB1 INPUT RGB2 INPUT RS-232C INPUT
AUDIO
INPUT (PC/DTV INPUT) (DIGITAL RGB INPUT) (CONTROL/SERVICE)
7 8
( ) L ( )
EXTERNAL SPEAKER
1