Canon Arizona 6100 XTHF Mark II Series User Manual page 69

NOTE
When Quality Density or Layered mode is used, there is a pull-down menu in the
Print Job module that allows you to select either Quality-Layered or Quality-Density
(the menu allows you to change how it was configured in your ONYX software).
When you use two layers, images will take twice as long ro print and with three
layers it will take three times as long.
10) Printer Interface Module Tabs
These tabs allow you to switch between different functional modules of the printer. Click on a tab
to display the screen associated with each of the modules available.
11) Software Version Number and Image Upload Progress
Displays the version of the currently installed printer software.
The image upload progress panel indicates the name of a job that is currently uploading to the
printer. This panel only displays information while an image is transferred from the host
computer.
Chapter 3 - How to Navigate the User Interface
Print Job Control Module
69