Table of Contents
Advertisement
INDEX SELECTION SOLENOIDS
1.
Adjust the solenoid core for. 020
11
pi unger to core air gap
by holding the plunger against the guide, turn in the core
until the plunger just begins to rise, back off the core
1/2 turn and tighten the lock nut (Fig. 207).
NOTE:
Be sure the links are not interfering during this
adjustment.
2.
Adjust the rear index selection solenoid link so the air
gap on the rear solenoi d wi II be . 120
11
to . 130
11
with the
front plunger sealed (Fig. 207).
3.
Adjust the front index selection solenoid link so the air
gap on the front solenoid will be .120
11
to .130" with
the rear plunger sealed (Fig. 207).
Lock Nut
Core
FIGURE 207.
Index Solenoid Adjustments'
2-59
Advertisement
Chapters
Table of Contents
