S-Video Loop-Out Connections - Zenith Presentation H27D44DT Installation & Operating Manual

S-Video Loop-out Connections

Use the S-Video Out jack to connect up to four other TVs in a "daisy-chain"
Setup for Looping-Out the Master TV's S-Video Image to other TVs
1
1. Make connections to the S-Video Out jack on the Master TV.
2
2. Connect S-Video cables to the daisy-chained TV's S-Video input jacks as shown.
3
3. On the "Daisy-chained" TVs, select the S-Video Input for the picture source.
Viewing Sources Note:
Follow instructions supplied with your TV(s) for selecting viewing sources. Picture
should appear on the Master and other TVs connected in series.
ABC
206-3492-O
TV Back
Antenna
Cable
M.P.I.
S-Video S-Video
In Out
ABC
S-Video Loop-out from Master TV to other TVs
Video Matrix
In
Out
R- Audio - L
In
ABC
ABC
P A G E 1 3