Security Admin
User Authentication Mode — Selects the authentication or authentication sequence required.
l
Local Only — The switch authenticates the user.
¡
Local then Remote — The switch attempts to authenticate the user first, and then a RADIUS server attempts to authenticate the user.
¡
Remote then Local — A RADIUS server attempts to authenticate the user first, and then the switch attempts to authenticate the user.
¡
Remote Only — A RADIUS server authenticates the user.
¡
RADIUS Server IP Address — Identifies the IP address of the RADIUS server.
l
RADIUS Shared Secret — Specifies the text string that is shared between the switch and the RADIUS server.
l
IP Filtering — Allows up to 16 IP addresses to access the switch management function, if enabled.
l
Password Admin — Enables or disables password protection.
l
Allowed IP Addresses — You can enter up to 16 IP addresses in the Allowed IP Address table.
l
Disable Telnet/Web Access (Console Only) — Provides an option to enable or disable Telnet or Web access to the switch.
l
NOTE:
The default password is switch.