Cleaning; Transport; Storage/Hibernation; Maintenance / Update - Scheppach ROBOCUT XXL900 Operating And Safety Instructions Manual

9.4.3.2 Adjusting the mowing zones
In this function you can manually set up four differ-
ent mowing zones in %. By default, the function is
set to "AutoMultizone". Here, the mower starts after
each charging process at an arbitrary place along
the boundary wire.
This means:
After the first charging process, the robot mower
moves along the boundary wire in accordance with
the set % number for zone 1 and starts mowing.
After the second charging process, it does the same
in accordance with the set % number for zone 2, etc.
Example:
You have installed 200 m of boundary wire and set a
value of 25% for zone 1.
After charging, the robot mower drives 50 m along
the boundary wire and starts mowing from there.
m NOTE
This function allows you to start the robot mower in
difficult-to-reach passages, for example, to ensure a
perfect mowing pattern.

10. Cleaning

m ATTENTION
Switch off the product with the button
m ATTENTION
Put on protective gloves before cleaning the rotating
blade carrier.
We recommend that you clean the product directly
after every use.
Clean the product at regular intervals using a damp
cloth and a little soft soap. Do not use any cleaning
products or solvents; they could attack the plastic parts
of the product. Make sure that no water can penetrate
the product interior.

11. Transport

• Press the button ("POWER ON/OFF" button) until
the robot mower (1) switches on.
ER ON/OFF" button) to switch the robot mower (1)
off.
• Wear protective gloves when transporting the robot
mower (1).
• Carry the robot mower (1) securely with both hands.
To prevent damage, avoid the robot mower (1) falling
to the ground from greater heights.
If this does happen, it must be immediately taken to a
specialist workshop for inspection.
32 | GB
before cleaning.
button ("POW-
www.scheppach.com
Do not continue to use the robot mower (1) before this
has been done.

12. Storage/Hibernation

Your mower will give you pleasure for longer if it is
allowed to hibernate.
Although this is not a problem, we recommend that
you store your mower in a closed room, e.g. in the
garage, during the winter.
Before storing the mower:
• Clean it thoroughly (see point 10)
• Charge the rechargeable battery fully.
• Switch the product off.
• Remove the rechargeable battery (see point 13.2).
Store the product and its accessories in a dark, dry
and frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5 and
40 ˚C.
Store the robot mower (1) in its original packaging.
Cover the robot mower (1) to protect it from dust and
moisture.
Store the operating manual with the robot mower (1).

13. Maintenance / Update

m ATTENTION
Disconnect the mains plug before carrying out any
maintenance work.
Connections and repairs
Connections and repair work on the electrical equip-
ment may only be carried out by electricians.
Please provide the following information in the
event of any enquiries:
• Type of current for the motor
• Machine data - type plate
13.1 Replacing the blade (7) (Fig. 25)
m ATTENTION
Switch the mower off before starting with the work.
m NOTE
The blades (7) must be replaced after approx. 8
weeks. (2 sets of 3 blades each are included in the
delivery)
Use only original blades from the manufacturer. (Art.
no. 7913001601)
m ATTENTION
Put on protective gloves before replacing the blade
(7).