Zenith DVT216 Installation And Operating Manual, Warranty page 28

Troubleshooting (Cont'd)
Symptom
Recording is not possi- • The components are connected
ble
• The source is selected incorrectly.
• The antenna is positioned or connected
Radio stations cannot
be tuned in.
• The signal strength of the stations is too
• No stations have been preset or preset
The remote control • The remote control is not pointed at the
does not work properly.
• The remote control is too far from the
• There is an obstacle in the path of the
• The batteries in the remote control are
28
Cause
incorrectly.
poorly.
weak (when tuning in with automatic
tuning).
stations have been cleared (when
tuning by scanning preset stations).
DVD receiver remote sensor.
DVD receiver.
remote control and the DVD receiver.
exhausted.
Correction
• Connect the components correctly.
• Select the source with FUNCTION but-
ton (CD/DVD, VIDEO 1, VIDEO 2 or
Tuner).
• Connect the antenna securely.
• Adjust the antennas and connect an
external antenna if necessary.
• Tune in the station manually.
• Preset the stations (page 19).
• Point the remote control at the DVD
receiver remote sensor.
• Operate the remote control within about
23 ft (7 m).
• Remove the obstacle.
• Replace the batteries with new ones.