Preparation For Recording.18 - Panasonic RX-ED77 Operating Instructions Manual

exposed tape facing you.
J
Preparation for Recording
Type of tape which can be used for recording
Automatically identifies the type of tapes.
Normal position/TYPE I
0
High position/TYPE II
o
Metal position/TYPE IV
X
This unit can not make a recording or erase correctly, if metal position
tapes are used.
Load the tape in deck 2 with the side to be
recorded first facing up. EJ
The automatically selected when the cassette with the side to he
recorded facing up.
•When recording from the begining of a cassette
Wind the leader tape out. E
•When recording from the middle of a cassette
Stop the cassette at the position where recording is to begin.
Press REV MODE on the remote control to
select the mode. 0
C^D: Records from the side facing up to the opposite side and
automatically stops.
Records only one side of the cassette and automatically stops.
Notes
•You cannot operate deck 1 during recording.
"E" is displayed when you attempt to operate deck 1.
• Any change made to the volume or sound quality during recording
will not affect the recording.
• In order to prevent trouble caused by flat batteries, it is recom¬
mended that you either supply power to the unit from the house¬
hold AC outlet or replace all the batteries with new ones when you
are recording something which is important to you.
• The recording level is set automatically.
Your attention is drawn to the fact that recording pre-recorded tapes
or discs or other published or broadcast material may infringe copy¬
right laws.