Using The Sleep Timer - Panasonic RX-ED77 Operating Instructions Manual

Using the Sleep Timer
(Available only from the remote control)
The unit off time can be set up to two hours ahead of the present
time.
Press SLEEP to select the desired time.
The display changes each time the button is pressed. ®
The unit is turned off after the time set has elapsed.
To release the timer function:
Press SLEEP to select "SLEEP OFF".
To check the time remaining during operation:
Press SLEEP.
To change the time remaining during operation:
Press SLEEP to show the remaining time then SLEEP to select the
desired time.
ISBB1
Pressing SLEEP can turn the unit on (only AC power is supplied).
Using the sleep and play timers in
combination
Example: Falling asleep listening to FM programing and waking
up the next morning listening to a CD. 0
© Program the play timer (A or
B)
for CD play (page 24).
© Select the desired radio station and set the sleep timer.
Plays the CD at the volume programmed in a in the morning even
if it is reduced the night before.
•When programmed times overlap B
When play is programmed to begin before the sleep timer turns the
unit off, the play timer is not activated. The unit turns off after the
programmed sleep timer is completed.
Always set the sleep timer so that the unit turns off by the time the
play timer is programmed to begin.
Using the sleep and recording timers in
combination
Example: Failing asleep listening to a cassette and recording
FM programming during the night B
© Program the recording timer to record the FM programming and
insert recording cassette into deck 2 (page 26).
© Insert the playback cassette into deck 1 and set the sleep timer.
•When programmed times overlap E
When recording is programmed to begin before the sleep timer
turns the unit off, the recording timer is not activated.
The unit turns off after the programmed sleep timer is completed.
Always set the sleep timer so that the unit turns off by the time the
recording timer is programmed to begin.