Pip (Picture-In-Picture) / Twin Picture; Watching Pip (Picture-In-Picture); Selecting The Viewing Source (In Pip And Twin Picture Modes) - Zenith C27V36 Installation And Operating Manual, Warranty

PIP/Twin Picture Modes
This function doesn't work in Component mode.
PIP is not available when selecting "on" for Lock on/off in special menu,
Parental ctl.

Watching PIP (Picture-in-Picture)

PIP is a little picture placed on the larger main picture screen. Using the
PIP feature enables you to see two different programs on the TV screen
at the same time.
1. Use the pip button to select either the PIP mode or twin picture
mode. Press the pip button repeatedly to select the desired sub
picture size. The sub picture appears as indicated below.
PIP [S]
PIP off
+
2. Use the pipch or pipch
the sub picture.
Note
-
+
• Use the CH / button to select the next higher/lower channel for
the main picture and use the pipch
next higher/lower channel for the sub picture.
Selecting the viewing source (in PIP and Twin
picture modes)
Source selection with the pip input button
1. Press the pip input button repeatedly to select
,
2. Press the exit button to save and return to TV viewing.
Source selection with the menus
1. Press the menu button and then use
Special menu.
G
2. Press the and then use
3. Press the G and then use
G
4. Press the and then use
,
5. Press the exit button to save and return to TV viewing.
PIP [M]
Channel Search
-
button to select the desired channel for
+
/pipch
, or .
D
D button to select
E
/
D button to select
E
/
D button to select
E
/
, or .
Twin Picture
-
button to select the
,
/ button to select the
E
.
.
,
23
Channel of Main Picture
Main Picture
PIP Mode
Main Picture Sub Picture
Twin Picture Mode
CH.
,
/
,
–
Channel of
Sub Picture
Sub Picture