Pip (Picture-In-Picture) Options - Zenith C32V37 Installation And Operating Manual

PIP (Picture-In-Picture) Options

PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other
source will show a smaller inset image.
Watching PIP
Press the PIP button to show the sub picture.
Each press of PIP button changes the PIP options as shown below.
PIP mode
PIP Source Selection
Changes the picture source for the Picture-In-Picture
screen so you can watch your off-air TV, cable TV, VCR,
or any other devices that are connected to your TV.
Using the PIP INPUT button
Use the PIP INPUT button to select the
1
input source for the sub picture.
Each time you press PIP INPUT button,
you toggle between DTV, Analog, Video 1,
Video 2, Video 3, and Front Video.
Using the menu
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the Setup menu.
Press the RIGHT arrow button to access
2
the Setup menu.
Use the UP/DOWN arrows to select the
3
Sub Input option.
Press the RIGHT arrow to access the Sub
4
Input menu, then use the UP/DOWN arrow
button to select the source. Your choices
are: DTV, Analog, Video 1, Video 2, Video
3, and Front Video.
Press EXIT button to return to TV viewing
5
or press MENU button to return to the
previous menu.
P A G E 2 6
POP mode
PIP off
Do not display a fixed image on the screen for long
periods of time.
Component 1-2 and DVI input sources are not avail-
able for PIP/Twin picture input source.
You can't select DTV for main and sub picture simul-
taneously.
Twin Picture mode
206-03890