Air Conception REVOLUTION 200 Instruction Manual page 19

Table of Contents

Advertisement

Every 50 hours or once a year:
The same as every 25 hours plus:
1. Replace the starter rope (if any visual wear).
2. Check the exhaust silencer condition.
3. Replace the transmission belt (non-clutch engine only).
Every 100 hours:
The same activities as every 50 hours plus:
1. Remove carbon deposits from the combustion chamber.
2. Replace the cylinder head gasket.
3. Replace the manual fuel pump (if any).
4. Replace the airbox rubber.
5. Replace the exhaust rubber mounts.
6. Replace the spark plug.
7. Clean or replace the main fuel filter inside the tank.
8. Replace centrifugal clutch.
9. Replace the transmission belt.
Every 200 hours:
The same activities as every 100 hours plus:
1. Replace the carburetor membranes.
2. Replace the piston with piston rings and needle bearing.
3. Replace the reed valve petals if necessary.
03/03/2024
V6
Page 19 of 23

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REVOLUTION 200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Nitro 200R200 xtremTornado 280R280 xtrem

Table of Contents