Table of Contents
Advertisement
Using Multi-Mode Play
®Selecting two out of the C-600's five timbres at a time and playing one of these
two on the keyboard-___
Here's how to play the piano left hand and the strings automatically, allowing the
piano right hand to be played on the keyboard-
Once you have mastered these
examples,
you may wish to refer to the section on "parts" on page 00 for more
information on this mode of operation.
©When
power is first turned on and multi mode
entered,
playing the keyboard will produce
the piano timbre-
Set the Concerto to record
mode and record the left-hand piano part into
Song 1-
(See the Concerto Owner's Manual for datails- )
(Switch)
PIANO
(PIANO timbre from keyboard)
©Press the HARPSI switch
while holding the
MIDI/TRANSPOSE switch down-
The HARPSI switch
will light indicating that
Part 2 has been selected.
When you let go of
the MIDI/TRANSPOSE switch, the STRINGS switch
will light indicating that the Strings timbre
is now selected for Part 2-
Playing the key¬
board will now produce the strings timbre.
Set the Concerto to record mode and record
the strings part into Song 2-
(Switch)
(STRINGS timbre from keyboard)
©Press the PIANO switch while holding the MIDI
/TRANSPOSE switch down. The PIANO switch will
light indicating that Part 1 has been select¬
ed.
(When you let go of the MIDI/TRANSPOSE
switch,
the PIANO switch will light indica¬
ting that
the Piano timbre is selected for
Part I- )
Playing
the
keyboard
will
now
produce the piano timbre-
(Switch)
s'
'V
PIANO
(PIANO timbre from keyboard)
d)Use the Concerto to play back the
piano data from Song 1 and the
strings data from Song 2-
You can use the
keyboard to play
along on the piano.
PIANO & STRINGS timbres
[1
from CONCERTO)
——
(PIANO timbre from keyboard)
-
11
-
Advertisement
Table of Contents
