Remote Control Auto-Find - Zenith B25A24Z Operating Manual

Remote Control Auto-Find

Use the remote control to search all possible codes.
If Programming the Remote did not find your code, try this procedure to automatically find
the code for your device.
Turn on the device you're
1
programming for the
remote control.
Press and hold the PRG key until
2
the indicator light turns on.
Press the key for the device you're
3
trying to program (CABLE, VCR,
TV).
Enter the code 0-0-0 (zero-zero-
4
zero), then press the ENTER key
right away.
Aim the remote at the correct
5
device and press the POWER
button. Allow a second to pass,
then push the POWER button
again. Repeat until the device
turns off. (This is a trial and error
process, so it may be necessary to
repeat these steps until the
remote finds your code.)
Push ENTER to save the code.
6
Press POWER to turn the device
7
back on.
P A G E 3 4
2
Indicator Light
3
4
PRG POWER
CABLE VCR AUX TV
SURF
FLASHBK MUTE
CHANNEL
VOLUME VOLUME
CHANNEL
1 2 3
4 5 6
7 8 9
0
ENTER
QUIT
MENU
TV/VCR
RECORD PAUSE TIMER
SOURCE
PLAY
REWIND FFWD
STOP
5/7
4/6
206-3479