Remote Control Auto Find - Zenith IQB27B42W Operating Manual

Remote Control Auto Find

Use Auto Find to automatically search and try all possible brand codes
1
Turn on the device you want the remote to control.
2
Press and hold PRG until the indicator light turns on,
then release PRG.
3
Press the key for the device you are trying to program
(CABLE, VCR, AUX, TV).
4
Press 0-0-0 (zero-zero-zero), then press ENTER right away.
5
Aim the remote at the correct device and push the POWER
key (The indicator light will turn off while the POWER key is
pressed). Allow a second to pass, then push the POWER key
again. Repeat until the device turns off.
6
Push ENTER to save the code (The indicator light will flash 3
times and then turn off).
7
Press POWER to turn the device back on.
You can quickly get out of Auto Find by pressing PRG.
If the indicator light stays on while you press Power instead of turn-
ing off, all the codes have been tried and your device can't be con-
trolled.
Mini glossary
AUTO FIND Another way of finding a brand code for controlling auxiliary equipment such as a VCR, DVD player, etc. that is
not available through the regular remote brand code programming method.
P A G E 4 6
2
prg
Indicator Light
cable vcr
surf
volume
1
4
7
4
0
menu
record
rewind
5/7
power
3
aux
tv
mute
flashbk
channel
volume
channel
2 3
5 6
8 9
4/6
enter
quit
tv/vcr
pause
timer
source
play
f. fwd
stop
206-3375