Table of Contents
Advertisement
P A G E 4 2
M B R Z - T R A K O P E R AT I O N
Amplifier Volume Override
Control the
volume on
your sound
Amplifier Volume Override:
amplifier
while in
1
other modes.
2
3
4
Cable Volume Override:
1
2
3
4
S P E C I A L P R O G R A M M I N G F E AT U R E S
Find the code that operates your
amplifier. Test it to make sure it's the
correct one by following the procedure in
the "Programming Your Remote" section.
Press and hold MUTE and FLSHBK on your
remote until the indicator light stays lit.
Press MODE Left/Right until the
indicator light is under the mode that
you want Amplifier Volume to appear,
for example, TV.
Enter the special code: 4-9-9, then
quickly press the ENTER button. (The
indicator should blink and then turn off.)
Find the code that operates your
cable box. Test it to make sure it's the
correct one by following the procedure in
the "Programming Your Remote" section.
Press and hold MUTE and FLSHBK on your
remote until the indicator light stays lit.
Press MODE Left/Right until the
indicator light is under the same mode
that you chose in step one.
Enter the special code: 3-9-9, then
quickly press ENTER. (The indicator light
should blink and then turn off.)
The VOLUME and MUTE keys now control
the cable box.
Your volume and mute keys now control
your amplifier. To change everything back
to factory settings, reprogram all keys
with their original codes. See
"Programming Your Remote," page 38.
If you can't find the code for your
amplifier, use the Auto Find feature.
cable
3
mode
2
surf
2
5
8
0
pip
stop
rew
play
Indicator lights
4
f. fwd
3357-o
Advertisement
Table of Contents
