Zenith A27B43 Operating Manual page 9

Hook Up Your Cable (CATV) and VCR
1
See diagrams at right to hook up
your Entertainment Machine.
Remove the back of the remote
2
and put in three AAA batteries.
3 Plug in your TV. Do not plug it
into a switched outlet.
120V
60Hz
4 Go to page 13 to Auto Program
your Entertainment Machine.
Leave your VCR and your television
tuned to channel three and use
the cable box to change channels.
Remember, when screwing in RF
cables onto jacks, clockwise tight-
ens, and counterclockwise loosens.
Use Video sources for better
picture and sound.
No A/V cables are included with
your Zenith Entertainment
Machine. Without A/V cables, VCRs
will not play videocassettes in
stereo sound.
3376-O
Cable Service and Audio/Video Cables
back of remote
TV back panel
(expanded view)
Cable Service with a Cable Box and Audio/Video Cables
TV back panel
(expanded view)
I N S TA L L AT I O N
Cable TV
wall jack
Round wire (75 ohm)
TV back
RF coaxial wire
(75 ohm)
not included
with TV
A/V cables
not included
with TV
Cable TV
wall jack
Cable box
In
output
Out
switch
3 4
Round wire (75 ohm)
TV back
RF coaxial wire
(75 ohm)
not included
with TV
A/V cables
not included
with TV
S TA N DA R D P A G E 9
Connect
your VCR and
Cable to your
Entertainment
Machine.
VCR back
VCR back AV panel
output
In
3 4
switch
Audio
Video
Out
R-L Out Out
VCR back
VCR back AV panel
output
In
switch
3 4
Audio
Video
Out
R-L Out
Out