Table of Contents
Advertisement
WARNING!
Pour the salt in the
Salt
compartment
only.
WARNING!
Do not put anything but salt
in the compartment
any other detergent/additive
is poured inadvertently in
this compartment, please
refer to 'Eliminating
detergent or other additives
from salt compartment' in
'Troubleshooting' chapter.
Only use special salt for
dishwasher and/or washing
machine. The proper salt
can be ordered from the web
site!
Other types of salts are less
efficient and over time could
damage the water softener
technology permanently.
WARNING!
Do not use fine
salt!
The appliance works
exploiting its full potential
with salt. Salt refilling when
required by the appliance
maintains the softening
system efficient. If you use
the appliance without salt for
a long time, once the salt is
finally refilled, the water
softener function is
completely restored after a
few long washing cycles.
10.4 Water softener
regeneration
After a few cycles, the appliance may
need to regenerate the water softener.
The regeneration process is
automatically ensured when running
programmes such as Cottons and
Salt
. If
Synthetics routinely even if the
programme duration is reduced by
tapping the Time Save button once, if
available in the appliance.
Other programmes may perform the
regeneration process automatically,
when settings and conditions allow it.
If you usually run very short
cycles, the regeneration
process may not occur: you
could see that salt has not
been used, since it is
consumed during
regeneration phase only.
To ensure the regeneration
process run a Cottons or a
Synthetics programme
once a week or every two
weeks at least.
ENGLISH
25
Advertisement
Table of Contents
