Table of Contents
Advertisement
24
www.aeg.com
Levels
C02
C03
1)
C04
C05
C06
C07
1) Factory setting, able to satisfy most of the use conditions.
10.3 Pouring salt
The water softener function acts through
special resins present in the appliance.
To regenerate the resins and make them
ready to soften the water pour a special
salt in the compartment
1. Open the detergent dispenser.
2. Open the compartment
3. Pour the special salt.
Water hardness range
°f
°d
(French de‐
(German de‐
grees)
grees)
6 - 13
4 - 7
14 - 21
8 - 11
22 - 29
12 - 16
30 - 37
17 - 20
38 - 45
21 -25
≥46
≥26
Salt
:
Salt
.
°e
(English de‐
mmol/l
grees)
5 - 9
0.6 - 1.3
10 -15
1.4 - 2.1
16 - 20
2.2 - 2.9
21 - 26
3.0 - 3.7
27 - 32
3.8 - 4.5
≥33
≥4.6
4. Close the salt compartment and the
detergent dispenser.
Regularly check if there is
enough salt.
The compartment
600 gr of salt that are sufficient for about
two months if the default water hardness
level (C04) is set and the water softener
is activated during wash phase only. A
different water hardness level or different
setting may increase or decrease the salt
consumption. Refer to 'How to set the
water hardness level' and 'How to set the
water softener also during rinse phase'.
The display shows the indicator
Salt
compartment
needs to be refilled with
salt, even if a little salt still remains.
ppm
60 - 130
140 - 210
220 - 290
300 - 370
380 - 450
≥460
Salt
can contain about
when
Advertisement
Table of Contents
