Table of Contents
Advertisement
degrees (°d), English degrees (°e),
mmol/l and ppm.
If necessary, please contact your local
water authority to check the water
hardness in your area.
If you cannot obtain the information by
your local water authority, detect the
water hardness by using the tester
supplied with the appliance
documentation.
Check in the "Water hardness levels"
table which is the proper level.
To set the water hardness level:
1. Press the On/Off button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. Touch the Temperature and the Spin
buttons simultaneously (by touching
the two buttons at the same instant,
as shown in the next drawing) for
some seconds until the display
shows the default level C04 and the
indicator
goes on. It means the
water softener is active during
washing only.
4. Touch repeatedly the Temperature
button until the desired level appears
(from C01 to C07).
5. Touch the Start / Pause button to
confirm your choice and exit the
menu.
Water hardness levels
Levels
Water hardness range
°f
(French de‐
grees)
C01
°d
(German de‐
grees)
≤5
≤3
How to set the water softener
also during rinse phase
The factory setting allows to soften the
water during washing phase only. This
setting satisfies most of the use
condition. However, if the inlet water is
particularly hard (C06 and C07 levels),
we suggest to set the water softener also
during rinsing phase to preserve the
fabric softness.
Once you have entered the menu by
pressing Temperature and the Spin
buttons:
1. Touch the Spin button. The
on.
This setting increases
the salt consumption.
2. Touch the Start / Pause button to
confirm your choice and exit the
menu.
How to deactivate the water
softener
Once you have entered the menu by
pressing Temperature and the Spin
buttons:
1. By touching the Spin button twice,
the water softener is excluded
completely. The indicator
go off and the
the display.
2. Touch the Start / Pause button to
confirm your choice and exit the
menu.
°e
(English de‐
mmol/l
grees)
≤ 4
≤0.5
ENGLISH
23
goes
and
appears in
ppm
≤ 50
Advertisement
Table of Contents
