Table of Contents
Advertisement
10.7 Starting a programme
without the delay start
Press
.
• The indicator of
and stays on.
• The indicator
on the display.
• The programme starts, the door
locks, the display shows the
indicator
If the indicator
flashes, the door is
locking. If the display
shows an alarm
message after the
indicator
flashed for a few
seconds, it indicates
that the door is not
properly locked (for
more details see
Troubleshooting
chapter).
• The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
10.8 Starting a programme with
the delay start
1. Press
again and again until the
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
:
• The appliance starts the
countdown.
stops to flash
starts to flash
.
has
• The door locks, the display shows
the indicator
If the indicator
door is locking. If the display
shows an alarm message after
the indicator
few seconds, it indicates that the
door is not properly locked (for
more details see Troubleshooting
chapter).
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
cancel the delay start:
• Press
appliance to pause.
• Press
display shows
• Press
start the programme
immediately.
10.9 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press
.
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
10.10 Cancelling a running
programme
1. Press the button
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
ENGLISH
17
.
flashes, the
has flashed for a
. To
to set the
until the
'.
again to
for some
Advertisement
Table of Contents
