Table of Contents
Advertisement
Problem
Oversudsing caused by improper detergent, such as liquid dish soap.
bE
• Do not use hand dishwashing liquids. Only use detergents which are designed for use in
• A
• To remove detergent residue in the tub, pour approximately 4 oz ~ 8 oz (100 ml ~ 200 ml)
Failure to level dishwasher.
• Make sure that the appliance is properly leveled.
Water leakage
AE
• Turn off the water supply to the dishwasher and call an LG Electronics Customer
• The dishwasher makes an alert sound for 10 seconds, and runs the drain pump
Excessive Water supplied.
FE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Heater circuit failure.
HE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Water temperature sensor error
tE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Heated air temperature sensor error
F3s
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Wash motor error
LE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Heat air dry fan motor error
F31
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Vario motor error
NE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
The Download Cycle is selected.
,
,
,
,
,
,
P1
Pz
P3
P4
Ps
P6
P7
• This is not an error code. This code indicates the current Download Cycle.
Test mode is selected.
#,
#,
#,
#
N:
U:
d:
t
• This is not an error code. This code is used when testing the dishwasher. Power the unit off
(# is a number.)
Rinse aid level setting mode is selected.
,
,
,
,
LO
L1
Lz
L3
L4
• This is not an error code. This code indicates the current rinse aid level. For more
Control Lock is activated.
CL
• This is not an error code. This code indicates that the control lock is activated. Press and
automatic dishwashers.
error can appear if dishes soiled with a lot of foamy food, such as whipped cream, are
bE
loaded in the appliance. To clear the error, turn the appliance off and start a new cycle.
of milk into a shallow bowl, place it in the upper rack and then run the appliance on the
Auto cycle.
Information Center at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).
intermittently. If power is turned off to the machine, the machine powers back on
automatically until the AE error is resolved.
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
and on and the code will disappear.
information, refer to the Adding Cleaning Products section.
hold Night Dry and Delay Start simultaneously for three seconds.
Possible Cause & Solution
TROUBLESHOOTING
45
Advertisement
Table of Contents
