Table of Contents
Advertisement
Mode
Small loads & heavy soil
• Use just the lower rack to save
energy and time.
High Temp.
Raises the main wash temperature to improve
cleaning.
If the High Temp. option is added to a cycle, the
Sanitized LED stays lit at the end of the cycle if the
dishes were properly sanitized. If the dishwasher
could not properly sanitize the dishes because the
High Temp. option was not selected, the cycle was
interrupted or the water could not be heated to
the required temperature, the indicator will not
light up at the end of the cycle. Open and close the
door or press POWER to turn the indicator off.
NOTE
• This high temperature rinse sanitizes dishes and
glassware in accordance with the NSF/ANSI
Standard 184 for residential dishwashers.
Certified residential dishwashers are not
intended for use in licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements for soil
removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all
cycles on a certified machine have passed the
sanitization performance test.
Dry Boost
Select the Dry Boost option for better drying
performance. This option adds heated drying time
to the cycle for better drying results.
Mode
Dry Boost
Press the Dry Boost button once,
Low
for optimal energy efficiency.
Dry Boost
Press the Dry Boost button twice,
High
for better drying results.
Dry Boost
Press the Dry Boost button three
Off
times to turn off the Dry Boost
option.
• If the rinse aid dispenser is empty, the Dry Boost
Low option is automatically added to all cycles
(except the Normal, 1 Hour cycle), unless you
set the rinse aid dispenser to L0.
Description
Description
Night Dry
Dishes are often left in the dishwasher overnight
after the cycle ends. This can result in the steam
inside the tub condensing on dishes, leaving them
wet. This option runs the ventilation fan
periodically to help vent the steam from the tub.
• The Night Dry option is selected by default for
all cycles for which it is available, except the
Normal cycle.
Delay Start
This feature delays the start of a selected cycle.
Each time the Delay Start button is pressed, the
delay time increases by an hour. The delay time
can be set from 1 to 12 hours, in one-hour
increments.
Remote Start
Use a smartphone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in the
cycle. Once this function is enabled, you can start a
cycle from the smartphone application. If the door
is not closed within 4 seconds after pressing
Remote Start, Remote Start is canceled.
Cycle/Option Guide
The cycle guide shows the available options for
each cycle.
To see the Cycle/Option Guide, refer to the online
owner's manual.
Using the Option Setting Mode
You can set various options by using the Option
Setting Mode.
1
Ensure the appliance is off.
2
Press POWER
and Remote Start
a
simultaneously to enter the Option Setting
Mode.
3
Refer to the table to set up each function.
OPERATION
29
b
Advertisement
Table of Contents
