Screen Position; Manual Configure; Screen Adjustments; Initializing - Zenith P50W28A Installation And Operating Manual

Screen Position

Screen Position
- Screen Position is available in the following modes:
RGB1-PC, RGB1-DTV (480p,720p,1080i), RGB2-DTV (480p,720p,1080i), COMPONENT (480p,720p,1080i).
1. Press the MENU button and then use
2. Press the G button and then use
G
3. Press the button and then use
4. Press the MENU button.
Manual Configure (RGB1 [PC] mode only)
Manual Configure (RGB1 [PC] mode only)
- If the picture isn't clear after auto adjustment and especially if characters are still jittery, adjust the picture phase
manually.
- To correct the screen size, adjust
1. Press the MENU button and then use
2. Press the G button and then use
G
3. Press the button and then use
F / G
4. Use the button to make appropriate adjustments.
• The adjustment range of
• The adjustment range of
5. Press the MENU button.
Screen Adjustments (VIDEO, S-VIDEO and COMPONENT
Screen Adjustments (VIDEO, S-VIDEO and COMPONENT
- Use this function to correct jittering or picture instability while viewing a video tape.
1. Press the MENU button and then use
G
2. Press the button and then use
3. Press the G button and then use
• Select the VCR option if watching a VCR.
• Select the TV option for other equipment. (Except VCR)
4. Press the MENU button.
Initializing (Reset to original default values)
Initializing (Reset to original default values)
- This function operates in every mode.
- To initialize the adjusted value
1. Press the MENU button and then use
G
2. Press the button and then use
G
3. Press the button.
• You can initialize ZOOM IN/OUT, POSITION, SPLIT ZOOM, PIP size, PIP position and
sub picture size for twin picture.
Selecting W Selecting W ide XGA ide XGA
- To see a normal picture, match the resolution of RGB mode (1024x768, 1360x768, 1366x768) with the selection
for XGA mode in the SCREEN menu.
1. Press the MENU button and then use
2. Press the G button and then use
G
3. Press the button and then use
4. Press the MENU button.
20
button to select the SCREEN menu.
D / E
button to select
D / E
D / E / F / G
button to adjust the picture position.
CLOCK .
button to select the SCREEN menu.
D / E
button to select
D / E
D / E button to to select
PHASE is 0 ~ 31.
CLOCK is -50 ~ +50.
D / E button to select the SCREEN menu.
button to select
D / E
button to select
D / E
button to select the SCREEN menu.
D / E
D / E button to select
mode (RGB1, RGB2 [PC] mode only) mode (RGB1, RGB2 [PC] mode only)
D / E button to select the SCREEN menu.
button to select
D / E
D / E button to select the desired XGA resolution.
.
POSITION
.
MANUAL CONFIG.
PHASE or CLOCK .
480i mode only)
480i mode only)
SCREEN ADJ. .
or .
TV VCR
RESET .
.
XGA MODE
VIDEO
AUTO CONFIG.
AUDIO ARC
ZOOM IN/OUT
▲
TIME
POSITION G ◀ ▶
▼
MANUAL CONFIG.
SPECIAL
SCREEN ADJ.
RESET
SCREEN XGA MODE
TWIN
MENU PREV.
VIDEO
AUTO CONFIG.
AUDIO
ARC
ZOOM IN/OUT
TIME
POSITION
0
G
MANUAL CONFIG. PHASE
SPECIAL
SCREEN ADJ. CLOCK 0
RESET
SCREEN
XGA MODE
TWIN
MENU PREV.
VIDEO
AUTO CONFIG.
AUDIO
ARC
ZOOM IN/OUT
TIME
POSITION
MANUAL CONFIG.
SPECIAL
SCREEN ADJ. G TV
VCR
RESET
SCREEN
XGA MODE
TWIN
MENU PREV.
VIDEO
AUDIO AUTO CONFIG.
ARC
ZOOM IN/OUT
TIME
POSITION
MANUAL CONFIG.
SPECIAL
SCREEN ADJ.
RESET G TO SET
SCREEN
XGA MODE
TWIN
MENU PREV.
VIDEO
AUDIO
AUTO CONFIG.
ARC
TIME
ZOOM IN/OUT
POSITION
SPECIAL MANUAL CONFIG.
1024x768
SCREEN ADJ.
1360x768
SCREEN
RESET
XGA MODE G 1366x768
TWIN
MENU PREV.