Table of Contents
Advertisement
VEHICLE CONTROLS
Automatic Operation
n
To open: Firmly push the switch back,
then release.
To close: Firmly push the switch
forward, then release.
The moonroof opens or closes
completely. To stop the moonroof at any
time, push the switch briefly.
Manual Operation
n
To open: Pull the switch back lightly.
To close: Push the switch forward lightly.
Release the switch when the window reaches the desired position.
Moonroof Tilt
n
To tilt: Push the center of the switch.
To close: Push the switch forward firmly, then release.
Closing the moonroof on someone's hands or fingers can cause serious
injury.
Make sure your passengers are away from the moonroof before closing it.
Interior and Exterior Lights
Operate interior and exterior lights when the vehicle is on or off.
Brightness Control
n
Adjust instrument panel brightness
when the vehicle is on.
To brighten: Turn the knob to the right.
To dim: Turn the knob to the left.
A beep sounds when the brightness
reaches its minimum or maximum.
Interior Lights
n
Change the interior light settings using the switches on the ceiling.
32 |
ON position: Interior lights remain on.
Door-activated position: Interior lights come on when any of the doors are
opened, the driver's door is unlocked, or the vehicle is turned off.
Models without Smart Entry System: You remove the key from the ignition
switch.
Models with Smart Entry System: When the power mode is set to VEHICLE
OFF (LOCK).
OFF position: Interior lights remain off.
Map Lights
n
Press the map lights to turn on or off.
Exterior Lights
n
Rotate the switches on the lever to operate the exterior lights. Push the
lever forward to turn on the high beams. Return the lever to its original
position for low beams.
VEHICLE CONTROLS
| 33
Advertisement
Table of Contents
