Table of Contents
Advertisement
Upflow Furnace with Bottom and Side Returns Mounted on a
Ducted Pedestal with Side Return and Filter Box
Important: Make sure the thermostat wiring hole is sealed on the
cabinet side with the side return.
Important: Make sure not to cut the cabinet in the "No Cut" area.
Note: Use Optional BAYLIFT kit to lift furnace. Follow kit instructions.
Note: The furnace bottom pedestal must be a minimum of 6" in
height.
Refer
Upflow Furnace with Side Return
Important: Make sure the thermostat wiring hole is sealed on the
cabinet side with the side return.
Important: Make sure not to cut the cabinet in the "No Cut" area.
Note: If using a filter box, use a transition, if possible, to attach the
filter box to the furnace cabinet.
No Cut Area
Refer
Step 9.
A801X-SVX001-1C-EN
Step 1.
to
Step 8.
Use four corner guides
to create cutout
to
Step 12.
F F u u r r n n a a c c e e G G e e n n e e r r a a l l I I n n s s t t a a l l l l a a t t i i o o n n
Cabinet cutout when used with BAYLIFT
21" Filter Cabinet with BAYLIFT Kit shown
No Cut Area
Cutouts
Upflow Furnace with Two Side Returns
Important: One of the sides must have a transition to allow the
thermostat wiring to exit the cabinet.
Important: If a transition is not a viable option, a hole will need to be
drilled in the side of the cabinet for the thermostat wiring
to exit.
Important: Make sure not to cut the cabinet in the "No Cut" area.
Note: If using one transition, the thermostat wiring will exit on the
transition side.
Note: If using a filter boxes, use transitions, if possible, to attach the
filter boxes to the furnace cabinet.
No Cut Area
Refer
Step 9.
Flush with back
of furnace cabinet
Use four corner guides
to create cutout
to
Step 12.
33
Advertisement
Table of Contents
