Frigidaire GHWQ083WC1 Use & Care Manual page 17

ECO (ENERGY SAVER) MODE:
DO THIS:
PRESS MODE
BUTTON
CHOOSE ECO
YOU WILL SEE:
The unit is factory set to run in eco (energy
saver) mode. Eco mode is the main cooling
function. We recommend leaving the unit in
eco mode to help save energy and money.
In eco mode, the fan will continue to run for
3 minutes after the compressor shuts o .
The fan then cycles on for 120 seconds at 10
minute intervals until the room temperature
is above the set temperature, at which time
the compressor turns back on.
To close the Eco mode (energy saver
mode), press the mode button to select cool
model.
NOTE:
Please note, that if the unit is changed to
'cool' or 'fan' mode then shut o , the unit
will turn back on in eco mode. This is
mandatory per government regulations. If
the unit is changed to 'cool' or 'fan' mode
and a power failure occurs, once the power
is restored the unit will return to 'cool' or
'fan' mode.
OPERATING INSTRUCTIONS
TO ACTIVATE THE CHILD LOCK FEATURE:
"Fan Speed" & "Filter Reset" BUTTONS
SIMULTANEOUSLY FOR 3 SECONDS
YOU WILL SEE:
Note: Press and hold the " Fan Speed " and "
Filter Reset " button for 3 sec can activate or
deactvate the LOCK function. The display
will show LC for 5 secs. The control panel will
be lock and the setting can not be changed.
CHECK FILTER FEATURE, YOU WILL SEE:
Note: This feature is a reminder to clean the Air
Filter (See Care and Cleaning) for more e cient
operation. The LED (light) will illuminate after
250 hours of operation. To reset after cleaning
the filter, hold the " reset filter" button 3
seconds and the light will go o .
YOU WILL SEE:
DO THIS:
PRESS AND HOLD THE
DO THIS:
HOLD RESET FILTER
BUTTON 3 SECONDS
17