Dvd Operation; Dvd Playback; General Features; Title Selection - Zenith DVT412 Installation And Operating Manual

DVD Operation

DVD Playback

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD/CD player.
Audio system: Turn on the audio system and select
the input source connected to the DVD/CD player.
Press OPEN/CLOSE to open the disc tray.
1 1
Load your chosen disc in the tray, with the
2 2
playback side facing down.
Press OPEN/CLOSE to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which offers a menu.
DVD
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or MENU to return to menu display.
otes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 19).
– DVDs may have a regional code.
Your receiver will not play discs that have a regional
code different from your receiver. The regional code
for this receiver is 1 (one).
20

General Features

ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

TITLE Selection

1 /3
DVD-V
When a disc has more than one title/group, you can
move to another title as follows:
Press DISPLAY, then use the appropriate number
button (0-9) to select a title/group number.

CHAPTER/TRACK Selection

1 /12 1 /3
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press SKIP/SCAN . or > briefly during
playback to select the next chapter/track or to return to the
beginning of the current chapter/track.
Press . twice briefly to step back to the previous chap-
ter/group/track.
To go directly to any chapter during DVD playback, press
DISPLAY. Then, press 3 3 /4 4 to select the
chapter/group/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
ote
For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.

Search

DVD
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The receiver will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
3 To return to normal play, press PLAY.

Pause

DVD
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY.
DVD