Table of Contents
Advertisement
Steps
1. Place the power-button assembly and its cable in the slot on the palm-rest assembly.
2. Place the power-button bracket on the power-button assembly.
3. Replace the three (M2x1.9) screws that secure the power-button bracket to the palm-rest assembly.
4. Adhere the power-button assembly cable on the palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the
right
I/O-board.
3. Install the
left
I/O-board.
4. Install the battery.
5. Install the
rear
I/O-cover.
6. Install the
2230 solid-state
7. Install the
2280 solid-state
8. Install the
base
cover.
9. Follow the procedure in
Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
2230 solid-state
4. Remove the
2280 solid-state
5. Remove the
rear
I/O-cover.
6. Remove the battery.
7. Remove the
left
I/O-board.
8. Remove the
right
I/O-board.
drive. (if applicable)
drive. (if applicable)
After working inside your
Before working inside your
drive. (if applicable)
drive. (if applicable)
computer.
computer.
53
Advertisement
Table of Contents
