Before Repairing The Compact Disc - Harman Kardon FL8400 Technical Manual

Compact disc changer
Hide thumbs Also See for FL8400:
Table of Contents

Advertisement

FL8400
SAFETY PRECAUTIONS
This symbol is intended to alert the user to
a
the presence of uninsulated "dangerous
voltage" Within the product's enclosure that
CAUTION
may be of sufficient magnitude to constitute a
tisk of electric shack to persons.
DO NOT OPEN.
:
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC
SHOCK,
DO NOT
Caution:
To prevent electric shock do not use this
REMOVE COVER (OR BACK).
(polarized) plug wid an extension cord,
7
receptacle or other outlet unless the blades can be
NO USER-SERVICEABLE
fully inserted to prevent blade exposure.
PARTS INSIDE. REFER SERVICING
Attention: Pour prévenir les chocs électriques ne pas utiliser
cetre fiche polarisée avec un prolongateur, une
TO QUALIFIED SERVICE
prise de courant ou une autre sortie de courant,
PERSONNEL.
sauf si les lames prévent étre insérées & fond sans
en laisser aucune partie 4 découvert.
a
SSS
eee
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
HANDLING LASER PICKUP
The laser diode in the optical system of this player can be damaged
by electrostatic discharge from
=
your clothes or your body. Proper electrostatic grounding for service personal is required during servicing.
BEFORE REPAIRING THE COMPACT DISC PLAYER
Preparation
« Human Body Grounding:
Many of the components used in this compact disc player, including the laser pickup, are sensitive to
electrostatic discharge. Service personal should be grounded with an electrostatic armband (1 Mohm).
* Caution:
seo
Static charge on clothing does not escape through a body grounding wrist band.
Be careful not to contact the pickup or electrical components with your clothing.
« Workbench and Tool Grounding:
A properly-grounded electroconductive plate (1 Mohm) or metal sheet should be fitted to the workbench
surface. Tools and instruments (such as soldering irons and scopes) should be grounded to prevent AC
leakage.
Incorrect
Correct
Grounded Conductive
Wrist far Body
By
Zr. ma
Ge
ine
ima
Conductive Sheet
or Copper Plate
Figure 1
Figure 2
Note: Laser diodes are so susceptible to damage from static electricity that, even if a static discharge does
not ruin a diode, it can shorten its life or cause it to work improperly:
3

Advertisement

Table of Contents
loading

Table of Contents