FL8400
DISASSEMBLY INSTRUCTIONS
1. Remove the top cover (Figure 3).
2. Remove the bottom cover (Figure 4).
1) Turn the set over.
2) Remove 9 screws (@) to @) from the bottom chassis.
3) Remove 2 screws (4, @D) from the back chassis.
3. Remove the front panel (Figure 5).
1) Remove 3 screws (@) to @).
2) Remove 2 connectors (CNT105, CNT109) from the main B'D.
—
3) Remove 3 screws (@ to ©).
4) Turn to the clockwise gear loading of the assembly Sock gear (see figure 6).
5) Hold the cover tray and then pull it up.
:
6) Remove 2 connectors (CNT111, CNT112) from the main B'D.
CNT111
CNT112
ao
co