Table of Contents
Advertisement
FL8400
4, Remove the loading table (Figure 6).
1) Remove 4 screws (@ to @) holding the frame body.
2) Remove 4 screws (6 to ®) holding the assembly chuck.
3) Remove the assembly chuck.
4) Stretch out the frame body and then remove.
5) Remove 2 screws @ and @ holding the left guide tray (F) (same as right guide tray).
6) Pull the roulette tray up to the front and hold it up.
7) Remove the lead assembly 4P from CNT107-A on the sensor B'D.
"4
Assembly,
Lock, Gear
Figure 6
5, Remove the main board (Figure 7).
1) Disconnect all lead assembly.
2) Release the 4 tabs (attached to the main board) from the body mechanism.
Main PC Board
Figure 7
12
Advertisement
Table of Contents
