Pioneer C-90 Operating Instructions Manual page 8

OPERATIONS
| RECORDING ONTO AUDIO TAPE |
To record sounds being listened to at present
Sounds from FM/AM broadcasts, record or compact disc
playback, or the audio components connected to the AUX 1,
AUX 2, AUX 3 terminals can be recorded merely by setting
your tape deck to the recording mode.
(Consult your tape deck's operating instructions regarding
proper operating procedures).
8
<ARE1026>
| COPYING A PRE-RECORDED TAPE
By
using two tape decks, you can easily copy the contents of a
pre-recorded tape onto another tape.
© NO
NO
Recording from tape deck 1 onto tape
deck 2
Load the pre-recorded tape into tape
deck 1, and a non-recorded tape into tape
deck 2.
Press the TAPE COPY switch to light the
TAPE COPY 1 © 2 indicator.
Set tape deck 1 to the playback mode,
and tape deck 2 to the recording mode.
Recording from tape deck 2 to tape deck 1
Load the pre-recorded tape into tape
deck 2, and a non-recorded tape into tape
deck 1.
Press the TAPE COPY switch to light the
TAPE COPY 2 > 1 indicator.
Set tape deck 2 to the playback mode,
and tape deck 1 to the recording mode.