Pioneer C-90 Operating Instructions Manual page 7

OPERATIONS
[ TO PLAY BACK CONNECTED COMPONENTS |
1 2 5
= eet
HIGH FILTER
In the event that high-range sounds of the playback are too
strong, set the high-cut filter to the ON position. A 10 kHz
filter will be applied to attenuate the high-range emphasis.
Press [Tuner].
¢ To listen to compact disc playback
Press [CD].
¢ To listen to record playback
Press [Phono].
Set the cartridge selector switch to match the kind of TONE CONTROL
cartridge used on your turntable,
MM, MC 40 Q, or
To adjust the tone of the playback sound, press the TONE
MC 3@
' '
:
switch so that the TONE indicator lights. Then use the BASS,
Press [Tape 1].
© To play back tape deck 2
Press [Tape 2].
ADAPTOR SWITCH
Turn this switch ON when using a device (adaptor device)
*To use the component connected to the AUX 1 ter-
connected to the ADAPTOR IN/OUT terminals at the rear of
minals the unit.
Press [AUX 1].
When not using an adaptor device, be sure to turn this switch
minals
Press [AUX 21.
To use the component connected to the AUX 3 ter-
minals
Press [AUX 3].
Turn on the power to the components to
be used.
Operate the component to begin play-
back.
Adjust the sound volume with the
volume control.
o1 & ©
7
<ARE1026>