Busch-Jaeger Busch-free@home BI-F-2.0.x2 Product Manual page 32

6.4.1 Linking sensor and actuator
Fig. 16: Linking sensor and actuator (example illustration)
1. Select the sensor [1] in the building plan that is to be linked with the actuator (detailed
information is available in the system manual).
2. Select the actuator [2] that is to be switched by the sensor.
3. If necessary, make changes to the parameter settings.
4. Tap on "Save" to take over the settings.
– A blue connecting line indicates the link between the two devices.
– The selection can be cancelled via the "Deselect" button.
Notice
A sensor can be linked with several actuators.
A sensor can additionally be linked with scenes.
Product manual 2CKA000073B5465
Configuring, positioning and linking of the devices is carried out via
menu "Devices, scenes and groups".
Commissioning
│32