Advertisement
LED
Status
LED off
No power supply
LED static green
ECPD alright
LED flashes 2 Hz green
ARD active (Handle LED flashing 2 Hz red)
LED flashes 5 Hz green for 10 s
Device identification after ext. command
LED flashes alternately 2 Hz yellow / green
Warning metering value threshold exceeded (e.g.
temperature, voltage, current) with auto reset when
threshold not exceeded.
LED flashes alternately 2 Hz yellow / red
End of life: Warning life cycle parameter threshold
exceeded (e.g. switching cycles, number of trips) –
reset only by changing threshold / deactivate
warning
LED flashes 2 Hz red
Device tripped
LED flashes 4 Hz red
Device error, Selftest failed
6
Device LED
LED
Status
LED off
No Communication, no power supply
LED static green
Communication alright
LED flashes 0.75 Hz green
Not paired with master device
LED flashes 2 Hz green
Internal process running e.g. pairing, firmware
update
LED flashes 2 Hz green after 3s for 7s,
afterwards flashing 10 Hz green, when pressing the
pairing button ≥ 10 s.
Reset device keys to factory default (unpair from 7KN
Powercenter 1000)
LED flashes 2 Hz yellow
Communication error
COM LED
L1V30912073A-01
Advertisement
