Water Tank Temperature Sensor Installation; Odu & Aux. Power Connection - Midea MT-200R20E20 Installation And Owner's Manual

5.2 Water tank temperature sensor installation

Connect the water tank temperature sensor wire connector to the outdoor unit T5L connector.
5.3 ODU & AUX. power connection
If the water tank has the electric auxiliary heating(AUX.)function, please follow the steps below to connect the electric
auxiliary heating power cord.
1. Remove the protective cover of the electric control box on the right side of the outdoor unit.
2. Connect the electric auxiliary heating power line on the water tank to the corresponding port on the terminal block.
Water tank temperature sensor T5L
T5L
PCB
NOTE
Terminal block
16
Fig.5-1
Fig.5-2
Fig.5-3