Grind-By-Weight Workflow With The Acaia Lunar - acaia AOT007 User Manual

Grind-by-Weight Workflow with
the Acaia Lunar
Follow the steps below to set up the grind-by-weight function with the Acaia Lunar.
Apply Lunar Magnetic Strips
1
Remove the Lunar
magnetic strips
application tool along
the dotted line.
4
Peel off the backing
paper of the
magnetic strips.
Note:
The Lunar metal magnetic strips cannot be repeatedly pasted. Before attaching the Lunar, you
must clean the bottom of the Lunar thoroughly, then attach the magnetic strip. You also need to
apply pressure to flatten the magnetic strip to ensure it sticks firmly. If the strip is not securely
attached and shifts, the adhesive on that magnetic strip will be damaged and cannot be reused.
2
Fold the flaps at the
top and bottom of the
application tool along
the dotted line.
5
Align the magnetic
strips with the
application tool and
attach the strips to
the Lunar.
3
Align and insert the
application tool flaps
into the Lunar base
gap.
6
Remove the
application tool.
21