Table of Contents
Advertisement
Manual Grinding
Orbit's manual grinding mode enables you to control the RPM freely in real time. During a
single grinding session, you can change the speed of the grinder by simply dragging the
RPM slider in the Orbit App. You can see the real time RPM graphed in the chart on the
App main page.
The Orbit will display a Magenta light when in manual mode. Please note that RPM
profiling is not available in manual mode.
Connect to Orbit
1
through the Orbit App
and choose Preset M
(Manual Mode.)
The RPM slider
2
becomes active when
switched to Manual
mode.
Use the slider to adjust
3
the speed of the
grinder. The real-time
RPM will be displayed
by the green line in
the graph below while
target RPM is displayed
by the gray line.
17
Advertisement
Table of Contents
