acaia AOT007 User Manual page 19

Reverse-And-Adjust
Utilize the "Reverse-and-Adjust" function for effortless switching between filter and
espresso grind settings. Please refer to Page 11 for detailed instructions.
Auto Start Grinding
1. The default setting is OFF.
2. On: Auto Start enabled; Orbit automatically starts grinding once a cup or container
weighing more than 5 grams is placed on Lunar.
3. Off: Auto Start disabled; start grinding by clicking the Orbit button.
4. Auto Start is only supported in grind-by-weight mode. You may also enable the Auto
Start Grinding via the Lunar scale. In Manual mode, press and hold the Tare button for
3 seconds to enable/ disable the Auto Start function.
Auto Stop Grinding
1. The default setting is ON.
2. On: Auto Stop enabled; grinder will automatically stop grinding when
- 3 seconds after grinding session ends.
- No coffee beans are detected for around 15-17 seconds after a grinding session is
started.
3. Off: Auto Stop disabled. Auto Purge will also be disabled.
4. Auto Stop is only supported in single dose grinding.
Auto Purge
1. The default setting is ON. Auto Purge Setting can only be turned on when Auto Stop
Setting is on.
2. On: Auto Purge enabled.
3. Off: Auto Purge disabled.
4. Auto Purge is only supported in single dose grinding.
Auto Off
1. The default setting is ON.
2. On: Auto Off enabled; Orbit automatically enters standby mode after 15 minutes.
3. Off: Auto Off disabled.
Clear Paired Acaia Scale
Tap [ Clear ] to clear the paired Acaia Lunar. Each orbit can only pair with one Lunar at a
time. If you wish to pair with another Lunar, please reset the pairing through the App, or
reset the Orbit to factory default.
Reset to Default
Tap [ Reset ] to reset Orbit to factory default. All settings including RPM profiles, button
actions, and pairing will be reset to factory default.
Enable / Disable Acaia Scale Connection
1. The default setting is ON.
2. On: Connection to Acaia Scale enabled; Lunar will automatically pair / connect to Orbit
when placed on the Orbit.
3. Off: Connection to Acaia Scale is disabled; Lunar will NOT automatically pair / connect
to Orbit when placed on the Orbit.
19