Panasonic AG-7700E Operating Instructions Manual page 44

[1]
[2]
[3]
Setting the time code board switch
ALL DEL switch
This selects the lines, where the VITC can be inserted for the
input video signals, which are to be deleted during VITC
recording.
ON (factory setting): All the lines (7 to 22) where the VITC can
OFF
Recording the optional (preset) time code/user's bit
Set the "TC INT/EXT SELECT" (item No. 7001) dial menu function to "INT." (See page E-40.)
Set the "TC MODE" (item No. 7002) dial menu function to "REC RUN." (See page E-40.)
Set the "TC MODE" (item No. 7002) dial menu function to "REGEN." (See page E-40.)
Dubbing the LTc signal recorded on the abs
(Dubbing the LTC signal with the settings below prevents
deterioration in the LTC time code signal.)
Set to "LTC" mode with the LTC/AUTO/VITC button. (See page E-43.)
Set to "TC" mode with the CTL/TC/UB button. (See page E-43.)
Set the "TC MODE" (item No. 7002) dial menu function to "REGEN." (See page E-40.)
be inserted for the input video signals are
deleted.
: Only two lines where the VITC is inserted
for the input video signals are deleted.
E44