Table of Contents
Advertisement
Time code set-up items
Item
Set-up value
No. | Superimpose display
No. | Superimpose display
|
7001
|TC INT/EXT SELECT
/00
(AG-7700 only)
01
Description of function
Set this switch to EXT if an external time code
connection has been made.
_<) Selects the TC mode.
00: Operates to maintain continuity of the data
on the tape.
01: Uses an internal preset value to advance
the tape only during recording.
02: Uses an internal preset value to advance
the tape all the time.
7002 | TC MODE
(AG-7700 only)
7003 | VITC REC
(AG-7700 only)
_ _ | Selects whether or not to use VITC recording.
.|00:
Don't use VITC recording.
01: Use VITC recording.
7004 | VITC POSITION SEL-1
(AG-7700 only)
Selects VITC signal insertion line.
*Same line as No. 7005 cannot be selected.
(Avoid selecting an adjoining line.)
VITC POSITION SEL-2
(AG-7700 only)
Selects VITC signal insertion line.
:
*Same line as No. 7004 cannot be selected.
12 LINE
(Avoid selecting an adjoining line.)
22 LINE
}PLAY
9 00
<2
| Selects when to use VITC REGEN processing.
PLAY + REC
00: Perform REGEN processing during
playback.
01: Perform REGEN processing during
playback and when recording audio.
VITC REGEN
(AG-7700 only)
TCG REGEN MODE
(AG-7700 only)
Selects regeneration signal when TCG is in
REGEN mode.
00: Regeneration for time code and user's ft.
01: Regeneration for time code only.
02: Regeneration for user's bit only.
7008 | TC OUT SIGNAL REGEN
|
Sets the waveform to be output from the TIME
CODE OUT connector when in the INTERNAL
REGEN mode.
00: Outputs the playback signal without
modification.
01: Outputs the playback signal with REGEN
processing during SERVO LOCK only.
[The shading denotes the initial setting.]
—E-40 -
Advertisement
Table of Contents
