Advertisement
Beoconnect Core
C O N N E C T T O B E O S O U N D S H A P E
Update your Beosound Shape with the Beoconnect Core for improved sound quality and
direct digital connection to the amplifiers.
Note:
A bracket is needed when installing Beoconnect Core in a Beosound Shape setup.
Connect an RJ45 Cat7 cable from the "COMM" socket on Beoconnect Core to the "COMM
In" socket on the primary Beosound Shape amplifier.
When replacing the Beosound Core in an existing Beosound Shape setup with the
Beoconnect Core, make sure to disconnect Beosound Shape from the mains. Then connect all
the cables between the Beoconnect Core and the primary amplifier. Afterwards connect both
the amplifier and the Beoconnect Core to the mains. Make sure to switch on the amplifier first
and then the Beoconnect Core.
Note:
Once switched on, continue the setup in the Bang & Olufsen App. Make sure to have the
Design ID of your unique Beosound Shape design ready, as you need to enter it into the app
to finalise the setup.
1 1
Advertisement
