Advertisement
Beoconnect Core
C O N N E C T T O B E O L A B 5 0 O R 9 0
Beolab 50 and 90 loudspeakers can be connected to the USB-C port to create a fully
digital signal chain from the source to the loudspeaker. Use a USB-C to USB-B 2.0 cable
between Beoconnect Core and the primary speaker. Connect the primary and secondary
speakers together via the DPL (RJ45) sockets. After connecting the speakers via USB, connect
all devices to the mains and continue setup in the Bang & Olufsen App. After connecting
Beoconnect Core to your network, you will see an option to enable Beolab 50 or 90 in the
control screen.
1 0
Advertisement
