Preparations Before Use; Placement Of The Self-Cleaning Base; Installation Of Side Brush To Robot Vacuum - Eureka NER J12 Ultra Instruction Manual

13

PREPARATIONS BEFORE USE

Placement of the Self-Cleaning Base

01
Place the self-cleaning base on a hard surface against a
wall, with clear space of at least 0.05 meters on the left
and right sides and 1.3 meters in front.
02
Plug the power cord into an electrical outlet. Then wind
the excess cable around the power cordstorage slot on
the back to avoid a ecting the proper function of the
robot vacuum.
5cm
5cm
1.3m
NOTES
1. Do not expose the base under direct sunlight.
2. Do not cover the signal transmission area of the self-cleaning
base with objects such as stickers.
3. Do not place the base on floors with carpet or other soft
coverings.
4. Please keep the charging area dry.

Installation of Side Brush to Robot Vacuum

01
Turn the main unit over. Attach the side brush to its
color-matched post and press down until they fit into
place.
02
To remove the side brush, grab the rubber-coated legs
of the side brush with both hands (be careful not to pull
the hair bundle vigorously) and pull it out.