Installation Of The Driver Software - Yamaha WF192 Online Manual

The soundcard will not work until you install appropriate driver software (Yamaha DS-XG driver) and reboot
the computer. Follow the instructions below to install the appropriate DS-XG driver.
n
Different driver software should be installed to a different version of Windows 95. Say, Windows 95 OEM System Release 2 (aka.,
OSR2) requires driver software other than for pre-OSR2 version of Windows 95.
Installing the DS-XG Driver Software for Windows 95 (4.00.950 or 4.00.950a)
The WAVEFORCE soundcard is a Windows 95 Plug-and-Play device. Once the soundcard is installed and
your computer is rebooted, Windows 95 will automatically detect the device and start the Install Wizard.
The New Hardware Found window will appear as shown below.
1 Insert the WF192XG Installation Wizard CD-ROM in your CD drive, select "Driver from disk provided by
hardware manufacture" and click the [OK] button to continue.
2 Windows95 asks you to insert a floppy disk. But the drivers are supplied by CD-ROM, click the [Browse]
button.
3 Select CD-ROM drive and the folder "drivers\win95\English". Then click the [OK] button.
n
The folder "drivers\win95\Italian" and "drivers\win95\Spanish" are also available instead of "\English".
This completes the installation process of the DS-XG Device Manager. Consecutively, install the device
drivers for PCI Audio Codec, Legacy Sound System and Legacy Game Port.

Installation of the Driver Software

5