Adjusting the DS-XG Mixer Control Settings
Once all DS-XG device drivers are installed, you can use the Windows standard volume control to adjust the
volume level of selected audio devices by following the procedures in this section.
1 Click on the Speaker icon located in the bottom rightmost corner of the Windows taskbar.
2 The DS-XG mixer control starts and the Volume Control window is displayed as shown below.
3 Adjust the volume as desired for each audio device by dragging the slide-bars vertically. You may also
click on [Options] in the menu bar and then click on [Properties].
4 To access the advanced controls for the Microphone device, first click on the "Mute" box and then click
the [Advanced] button as below.
20